Forms only
additive can hold.
One-off and short-run tables, chairs, and seating printed at full scale, with sweeping forms a machine or a mold could never reach, then finished on the CNC side of the floor.
Design first, then print it at size.
Injection tooling and hand fabrication both push furniture toward shapes that are easy to make. Large format additive removes that limit: a designer draws the form and we print it at full scale, one piece at a time. West Michigan is one of the country's furniture capitals, and AMMO gives the studios here a way to prototype a chair or produce a short run of statement pieces without cutting a single tool.
Statement tables
Bases and one-piece tables with organic, sculptural forms printed at full scale.
Seating and chairs
One-off and short-run seating with continuous, flowing geometry.
Prototype furniture
Full-size, sit-on-it prototypes to prove a design at scale before you commit to tooling.
Architectural pieces
Reception desks, feature seating, and installation elements sized to the space.
Printed in pellet-fed polymers including PLA, PETG-CF, and ABS-CF, chosen for the look and the loads the piece will see. Finish and material are confirmed on quote.
Bespoke geometry
Additive builds shapes that draft angles and cutters cannot, so the form follows the design rather than the process.
Prototype to short run
Prove a single piece, then produce a short run on the same cell, with no tooling to cut or amortise across the batch.
Machined finish
Key surfaces are CNC machined after printing, so seats and tops meet the hand with a finished surface, not a raw print.
Common questions
- Do you make one-off pieces or production runs?
- Both. Because there is no tooling to cut, a single custom piece and a short production run run on the same cell. Tell us the quantity and we will quote it.
- How big a piece can you print?
- This is large-format additive, so full-scale furniture is well within range. The exact build envelope is confirmed on quote for your piece.
- What is the surface finish like?
- As-printed, large-format parts carry a visible layer texture. We CNC machine the surfaces that matter and can advise on finishing for the rest, confirmed with the quote.
- Can you print from a designer's model?
- Yes. Send a 3D model, STEP or STL, and we will review it for large-format printing and come back with a quote and any design notes.
Have a part
or a mold?
Send the geometry and we will tell you the fastest way to make it and what it costs.